◎ Applications:
Long distance telephone, CATV, Data communications.
◎ Installations:
Installed in duct, self supporting (Figure 8 self supporting or ADSS All dielectric self supporting) and direct burial (with armouring).
◎ Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either PE or LSZH jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
◎ Technical Parameters:
☆ Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
☆ Maximum Pulling Load: 1500N (Short Term Installation); 900N (Long Term Installation)
☆ Maximum Compressive load: 3000N (3.3mm loose tube diameter); 5000N (4.5mm loose tube diameter)
☆ Twist (Torsion Length): 125 x Overall Diameter
☆ Working Temperature: -20℃ ~ +70℃ (PE sheath)
☆ Storage Temperature: -40℃ ~ +70℃ (PE sheath)
◎ Product Highlights:
☆ Small diameter and light weight.
☆ Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
cable can achieve better pulling load and operating temperature.
☆ Tube Materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
tube can provide water protection for the fibers inside the tube.
☆ Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
and achieve better flexibility.
☆ Wide operating temperature range
◎ Ordering Information:
AD-CLA-B-C-D-E-F-G-H-I-J
A: Loose Tube Diameter
A = 2.1 mm; B = 2.5 mm
B: Fiber Types:
0=Fibers and copper conductors in cable; 1=Two or more fiber types
in a cable
4=50/125 Multimode (OM3); 5=50/125 Multimode (OM2);
6=62.5/125 Multimode (OM1); 7= NZDS SM fiber per G.656;
8=NZDS SM fiber per G.655; 9=Standard SM fiber per G.652D
C: No of Tubes: 1-24
D: Inner jacket options
2Y =PE; Y =PVC; H =LSZH
E: Armour options
Blank=No armour; T=Corrugated steel tape armour; W=Steel wire armour;
B=Bronze armour; D=Fiber glass armour; TW= Steel tape + Steel wire armour
F: Jacket material options
2Y =PE; Y =PVC; H =LSZH; 8 Y =PA; 11Y =PU;
A=Aluminium moisture barrier; T=Anti-termite protection
G: Water-blocking options for Cable Cores
X=No water-blocking; J= Water-blocking gel in tubes; JD=Water-blocking gel in tubes + dry water-blocking in
cable core interstices; JJ= Water-blocking gel in tubes and cable core interstices.
H: Water-blocking options for Cables with more than one Jacket
X=No water-blocking; J=Water-blocking gel between jackets; D=Dry water-blocking between cable jackets
I: Strength member options
A=Aramid yarn; AG=Aramid yarn and fiberglass yarn; G=Fiberglass yarn
J: General options ：
SS=Fig-8 self-supporting; UW=Under Water
Multi Loose Tube Fiber Optic Cables
Product Profile 
